Extreme Duty Trans-Mount Crossmember
Extreme Duty Trans-Mount Crossmember; Two Pieces 3/16 in. Plate Steel; Made Of 0.120 in. Wall DOM Tubing;
This ultra-beefy crossmember is constructed of two pieces of CNC laser cut, precision brake-formed 3/16 plate steel. The double-wall sides of the Poison Spyder Extreme Duty Crossmember put the extra strength where its needed most to prevent the Taco-effect (when the crossmember bend upward in the middle)-in the side walls of the crossmember. This specific part number is designed to fit 2012 & later JKs. The 3/16 (0.188 thick) top plate and bottom plate provide far superior protection against dents and bends. The steel used in the Poison Spyder crossmember is 33% thicker on the top plate, and 2? times thicker on the bottom plate. And the 3/16 steel plate of the Poison Spyder Extreme Duty Crossmember has brake-formed corners all the way around-there are no welds on the box corners. Inside the crossmember, Poison Spyder fabricators have welded in four DOM tubing spacers to provide crush-proof strength at the crossmember mounting bolt locations. These are made of 0.120 wall DOM tubing. The Poison Spyder Extreme Duty Crossmember matches the external dimensions and bolt locations of the stock crossmember. All stock skid plates that were attached to the stock crossmember attach to the Poison Spyder Extreme Duty Crossmember. Any other manufacturers aftermarket skid plate system that attached to the stock crossmember should still attach to the Poison Spyder Extreme Duty Crossmember. The Poison Spyder Extreme Duty Crossmember is shipped as bare steel, ready for you to paint or powder coat in the color of your choice. This part number is for year model 2012 & later JKs, both 2-door and 4-ddor, with either manual or automatic transmission.
Hard Core Parts for Hard Core Jeeps!
Write the First Review!
You must login to post a review.