Additional Images

Poison Spyder 41-04-203 Rectangular LED Marker Lamp Fits 07-18 Wrangler (JK)

FVNN41-04-203
Rectangular LED Marker Lamp; 3-Wire Lamp; Surface-Mount; Over-Molded Housing; Polycarbonate Lens; 20 Gauge Wire; Encapsulated Circuitry; Requires 3/8 in. Mounting Hole;
Availability: Contact us for availability on this item.

Description

Side Marker Light

Rectangular LED Marker Lamp

Rectangular LED Marker Lamp; 3-Wire Lamp; Surface-Mount; Over-Molded Housing; Polycarbonate Lens; 20 Gauge Wire; Encapsulated Circuitry; Requires 3/8 in. Mounting Hole;


SPECIFICATIONS:
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

FEATURES:
  • Lamps Operate In Minor And Major Output Levels
  • Major Function Is 3 Times Brighter Than Minor Function
  • Red Major Function Is 7 Times Brighter Than Minor Function
  • Provides Marker / Clearance Solution Without Installation Screws
  • Lamps Adhere Directly To Application Surface
  • P2-Rated
  • Electronics Are Completely Sealed In Epoxy To Resist Damage
  • Easy-To-Install Peel-Off Liner
  • Requires 3/8 in. Mounting Hole / Self-Seals Hole

This rectangular LED Marker Lamp is the solution for those who need to run a combination marker lamp and turn signal in the same unit. This may be necessary on Jeeps where the OE turn signals and/or marker lamps were removed in order to install aftermarket armored fenders. These are-wire lamp which can perform two separate functions (minor and major-or typically, marker lamp and turn signal). For those needing a combination marker lamp/turn signal to satisfy local legal requirements, the small rectangular shape makes this lamp the ideal size to mount along the outer edge of the Poison Spyder DeFender. Installation requires simply drilling a 3/8 hole, thoroughly cleaning the mounting surface, peeling back the adhesive cover, pushing the wires through the hole then firmly pressing to set the adhesive, then making the wiring connections. This is a surface-mount lamp. It is constructed of Polycarbonate Lens, Over-Molded Housing, Encapsulated Circuitry and 20 Gauge Wire. Light source: 3 Light Emitting Diodes (LED); Designed at 13.5v; (Minor)0.004A - 0.015A; (Major)0.048A - 0.068A

Hard Core Parts for Hard Core Jeeps!

Shipping Information

  • Item Requires Shipping
  • 1.0 lbs.
  • W4.0000” x H3.0000” x L5.0000”
  • Free Ground Shipping