Design Engineering 010836 Hi-Temp 3:1 Shrink Tubing Kit

BGWZ010836
Hi-Temp 3:1 Shrink Tubing Kit; 4 pc.; 9/12/18 And 24 mm x 4 ft.; Each;
Availability: Contact us for availability on this item.

Description

Heat Shrink Sleeve

Hi-Temp 3:1 Shrink Tubing Kit

Hi-Temp 3:1 Shrink Tubing Kit; 4 pc.; 9/12/18 And 24 mm x 4 ft.; Each;


SPECIFICATIONS:
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: This product contains a chemical known to the state of California to cause cancer and or/ Birth defects or other reproductive harm. WWW.P65warnings.ca.gov

FEATURES:
  • Use To Insulate Wires/Connections/Terminals/Wire Splitting
  • 3:1 Shrink Ratio
  • Operating Temp Range -67 ? F To 275 ? F
  • Thick Wall Construction And Remains Flexible
  • Max Operating Temp: 394 ? F For Short Duration
  • Easy To Install: Apply At 120 To 180 ? F Using Heat Gun
  • Offers Clean Professional Look
  • Meets MIL Spec DTL-23053/5C
  • Flame Retardant
  • Alternate To Plastic Ties And Tape

Professional grade military spec flexible polyolefin tubing provides excellent protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanding tubing shrinks down to 33% of it's original diameter for a snug seal without reduction to it's original length.

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Shipping Information

  • Item Requires Shipping
  • 0.2 lbs.
  • W5.1900” x H7.1900” x L1.7500”
  • Free Ground Shipping