Additional Images

BD Diesel 1042600 Xtruded Charge-Air-Cooler Intercooler

Xtruded Charge-Air-Cooler Intercooler; 2.68 in. Core; Incl. Cooler/Spacer/Hardware;
Availability: Buy with confidence seeing our inventory level.


Turbocharger Intercooler

Xtruded Charge-Air-Cooler Intercooler

Xtruded Charge-Air-Cooler Intercooler; 2.68 in. Core; Incl. Cooler/Spacer/Hardware;

  • Core Height: N/A
  • Core Thickness: N/A
  • Core Width: N/A
  • Overall Length: N/A
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING Cancer and Reproductive Harm

  • More Power And Better Fuel Economy Lower EGT
  • 57 Percent Cooling Surface w/95 Percent Better Heat Dissipation
  • Without Over 130 PSI Of Boost
  • Larger Passages Provide More Air Cooling
  • High Flow Cast End Tanks w/Balloon Proof Support Struts
  • The Strongest Most Efficient Cooler On The Market
  • 12 Months or 24000 Mile Warranty

Compressed air is heated air-and when you combine an aggressive fuel curve with elevated boost levels, high inlet temperature can result. That is why BD developed the Cool-It intercooler. With up to 57-percent more cooling surface area and an up to 33-percent thicker core, the Cool-It increases cooling effectiveness to approximately 90-percent, compared to only 70-percent for the stock intercooler. That can mean a temperature reduction of up to 200degrees Fahrenheit over the stock intercooler! At the same time, the up to 36-percent larger inlet and discharge tubes can handle up to 100 psi of boost and over 1500 cfm, while holding pressure drop to less than 1 psi. And with BDs new Chevy LB7/LLY Duramax unit having over 780 sq in of frontal cooling area and almost 2000 cu in. of cooling volume, that makes it 12-percent more area and 79-percent more volume over stock-4-percent more area and 37-percent more volume over some competitors. A direct, bolt-in replacement for the stock unit, the Cool-It is the best looking, best performing intercooler on the market. Hoses and spring loaded T-bar clamps included in some kits. New manufacturing design makes all end tanks casted with exclusive one-piece internal support columns that increase tank stiffness and strength.

BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!

Shipping Information

  • Item Requires Shipping
  • 62.0 lbs.
  • W26.0000” x H13.0000” x L52.0000”
  • Free Ground Shipping